Security Camera Brackets

Mounting brackets enable you to find the best possible placement for your cameras.

Reminder: Brackets are not universal!


All SCW Admiral Line Surveillance Camera Brackets


  1. Electrical Box Mount for The Detective, Radius 5.0, Garrison 5.0 - EBM26DFT

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  3. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  4. Outdoor Wall Mount for The Radius 12.0 and The Judge - WMN26P

    Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.


  5. Pole Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Watchkeeper, Scope, Beacon - PMB26ZV

    Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.


  6. Corner Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - CMB26ZV

    Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

    To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

    To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

    To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

    To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.


  7. Ceiling Mount with 200mm Pendant for The Lookout, Laser, Spotlight, Watchkeeper, Scope, Beacon - PM26ZV-200

    This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.


  8. 500mm Pendant Extension for The Lookout, Laser, Spotlight, Watchkeeper, Scope, Beacon - PM26ZV-500

    Indoor or outdoor, PTZ dome pendant installation

    Requires a Ceiling Pendant Base Mount.


  9. Ceiling Pendant Base Mount for Lookout, Laser, Spotlight, Scope, Beacon - PAB26ZV

    Indoor ceiling/hanging based installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, The Beacon

    Allows you to mount our PTZ cameras from the ceiling via our 500mm (19.685 inches) pendant extension pole: 500mm Pendant Extension for Lookout, Laser, Spotlight, Scope, Beacon - PM26ZV-500

    Dimensions: Φ4.6” x 1.2”

    Weight: 0.66lb

    Material: Aluminum alloy

    Requires a Pendant Pole.


  10. Swan Neck Mount for Lookout, Laser, Spotlight, Scope, Beacon - SN26ZV

    Sometimes you need to extend a PTZ past an obstruction, which is where you would use a Parapet Mount.

    Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

    Dimensions(L × W × H): 34.6” x 32.7”

    Weight: 9.26lb

    Material: Aluminum alloy


  11. Electrical Box Mount for The Deputy v2, The Deputy v3, The Deputy v4, The Sheriff, The Scout 5.0 and The Informant - EMB26DFD

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  12. Square Electrical Box Mount for The Warrior 2.0v1, The Warrior 4.0v1, all Warrior v2s, The Warrior 2.0v3 - EMB26BF

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  13. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  14. Electrical Box Mount for The Viking, The Knight, The Archer v1, The Gladiator, The Sharpshooter, or The Lookout Mini - EMB26BV

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  15. Outdoor Wall Mount Bracket for The Detective and Radius 5.0 - OWM26DF

    Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.


  16. Short Wall Mount for Lookout, Laser, Watchkeeper, Spotlight, Scope - SWM26ZV

    Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope

    Dimensions(L × W × H): 7.9" x 5.6” (base) x 9.1” (arm)

    Weight: 1.74lb

    Material: Aluminum alloy


  17. Long Wall Mount for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - LWM26ZV

    Indoor or outdoor, wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

    Dimensions(L × W × H): 8.5” x 5.6” (base) x 12.4” (arm)

    Weight: 2.2lb

    Material: Aluminum alloy


  18. Electrical Box Mount for The Radius 12.0 and The Judge - EBM26P

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  19. Tilted Ceiling Electrical Box Mount for The Radius 12.0 and The Judge - TMB26P

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  20. Wall Mount Bracket for The Deputy v2-4, The Sheriff, The Scout 5.0 and The Informant - WMB26DF

    Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.


  21. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy


  22. Round Electrical Box Mount for The Paladin 8.0, The Warrior 8.0v1, The Warrior 4.0v3, The Warrior 8.0v3  - EMB26BFR

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Warrior 4.0 v3, Warrior 8.0 v3, or Paladin 8.0 Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket.


  1. Round Electrical Box Mount for The Paladin 8.0, The Warrior 8.0v1, The Warrior 4.0v3, The Warrior 8.0v3  - EMB26BFR

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Warrior 2 v3 Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket.


  1. Square Electrical Box Mount for The Warrior 2.0v1, The Warrior 4.0v1, all Warrior v2s, The Warrior 2.0v3 - EMB26BF

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Warrior 2 v2 or Warrior 4 v2 Brackets

Reminder: Warrior 8 (the 4K model) has a wider circular base and can only use the brackets designed for it.

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket.


  1. Square Electrical Box Mount for The Warrior 2.0v1, The Warrior 4.0v1, all Warrior v2s, The Warrior 2.0v3 - EMB26BF

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Warrior 8 v2 Brackets

Reminder: Warrior 2 v2 and 4 v2 (the 1080P and 2x1080P models) have a smaller square base and can only use the brackets designed for it.

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket.


  1. Round Electrical Box Mount for The Paladin 8.0, The Warrior 8.0v1, The Warrior 4.0v3, The Warrior 8.0v3  - EMB26BFR

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Viking, Knight, Gladiator, Archer, or Sharpshooter Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket.


  1. Electrical Box Mount for The Viking, The Knight, The Archer v1, The Gladiator, The Sharpshooter, or The Lookout Mini - EMB26BV

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Corner Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - CMB26ZV

    Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

    To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

    To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

    To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

    To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.


  3. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Deputy 2, 4 or 8 Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket or the outdoor wall mount bracket.


  1. Electrical Box Mount for The Deputy v2, The Deputy v3, The Deputy v4, The Sheriff, The Scout 5.0 and The Informant - EMB26DFD

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Outdoor Wall Mount Bracket for The Detective and Radius 5.0 - OWM26DF

    Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.


  3. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  4. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  5. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  6. Wall Mount Bracket for The Deputy v2-4, The Sheriff, The Scout 5.0 and The Informant - WMB26DF

    Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.


  7. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Sheriff Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket or the outdoor wall mount bracket.

If you want to use the pendant mount bracket, you need both the pendant mount and the pendant mount adapter base.


  1. Electrical Box Mount for The Deputy v2, The Deputy v3, The Deputy v4, The Sheriff, The Scout 5.0 and The Informant - EMB26DFD

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  3. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  4. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  5. Wall Mount Bracket for The Deputy v2-4, The Sheriff, The Scout 5.0 and The Informant - WMB26DF

    Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.


  6. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Informant Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket or the outdoor wall mount bracket.

If you want to use the pendant mount bracket, you need both the pendant mount and the pendant mount adapter base.


  1. Electrical Box Mount for The Deputy v2, The Deputy v3, The Deputy v4, The Sheriff, The Scout 5.0 and The Informant - EMB26DFD

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  3. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  4. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  5. Wall Mount Bracket for The Deputy v2-4, The Sheriff, The Scout 5.0 and The Informant - WMB26DF

    Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.


  6. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Detective Brackets

If you want to use the pole mount bracket, you must first attach the camera to the electrical box mount bracket or the outdoor wall mount bracket.


  1. Electrical Box Mount for The Detective, Radius 5.0, Garrison 5.0 - EBM26DFT

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Outdoor Wall Mount Bracket for The Detective and Radius 5.0 - OWM26DF

    Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.


  3. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  4. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  5. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  6. Wall Mount Bracket for The Deputy v2-4, The Sheriff, The Scout 5.0 and The Informant - WMB26DF

    Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.


  7. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Judge Brackets


  1. Ceiling Mount with 200mm Pendant for The Lookout, Laser, Spotlight, Watchkeeper, Scope, Beacon - PM26ZV-200

    This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.


  2. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  3. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  4. Electrical Box Transfer Plate for Radius 12.0 and Judge - EBM26TP

    Electrical Box Transfer Plate for Radius 12.0 and Judge


  5. Outdoor Wall Mount for The Radius 12.0 and The Judge - WMN26P

    Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.


  6. Electrical Box Mount for The Radius 12.0 and The Judge - EBM26P

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  7. Tilted Ceiling Electrical Box Mount for The Radius 12.0 and The Judge - TMB26P

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  8. Pole Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Watchkeeper, Scope, Beacon - PMB26ZV

    Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.


  9. Corner Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - CMB26ZV

    Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

    To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

    To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

    To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

    To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.


  10. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  11. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Radius 12.0 Brackets


  1. Ceiling Mount with 200mm Pendant for The Lookout, Laser, Spotlight, Watchkeeper, Scope, Beacon - PM26ZV-200

    This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.


  2. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  3. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  4. Electrical Box Transfer Plate for Radius 12.0 and Judge - EBM26TP

    Electrical Box Transfer Plate for Radius 12.0 and Judge


  5. Outdoor Wall Mount for The Radius 12.0 and The Judge - WMN26P

    Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.


  6. Electrical Box Mount for The Radius 12.0 and The Judge - EBM26P

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  7. Tilted Ceiling Electrical Box Mount for The Radius 12.0 and The Judge - TMB26P

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  8. Pole Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Watchkeeper, Scope, Beacon - PMB26ZV

    Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.


  9. Corner Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - CMB26ZV

    Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

    To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

    To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

    To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

    To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.


  10. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  11. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Radius 5.0 Brackets


  1. Electrical Box Mount for The Detective, Radius 5.0, Garrison 5.0 - EBM26DFT

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Outdoor Wall Mount Bracket for The Detective and Radius 5.0 - OWM26DF

    Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.


  3. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy


  4. Ceiling Mount with 200mm Pendant for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - IPM26DF

    This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.


  5. 200mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-200

    This pendant mount allows select dome cameras to extend downward from the ceiling.


  6. 500mm Pendant Extension for Deputy, Detective, Sheriff, Informant, Radius, Judge, Scout 5.0 - PM26DF-500

    This pendant mount allows select dome cameras to extend downward from the ceiling.

Lookout Mini 5.0 Brackets


  1. Electrical Box Mount for The Viking, The Knight, The Archer v1, The Gladiator, The Sharpshooter, or The Lookout Mini - EMB26BV

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.


  2. Corner Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - CMB26ZV

    Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

    To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

    To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

    To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

    To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.


  3. Pole Mount Bracket for The Warrior, Paladin, Viking, Knight, Archer, Gladiator, Sharpshooter, Deputy, Detective, Sheriff, Informant, Radius, Judge, Lookout Mini, Scout 5.0 - PMB26B

    This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

    Dimensions(L × W × H): (5.00”x5.35”x2.45”)

    Weight: 0.75lb

    Material: Aluminium alloy

Watchkeeper, Lookout 2.0, Spotlight, Scope, and Laser Brackets


  1. Short Wall Mount for Lookout, Laser, Watchkeeper, Spotlight, Scope - SWM26ZV

    Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope

    Dimensions(L × W × H): 7.9" x 5.6” (base) x 9.1” (arm)

    Weight: 1.74lb

    Material: Aluminum alloy


  2. Long Wall Mount for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - LWM26ZV

    Indoor or outdoor, wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

    Dimensions(L × W × H): 8.5” x 5.6” (base) x 12.4” (arm)

    Weight: 2.2lb

    Material: Aluminum alloy


  3. Swan Neck Mount for Lookout, Laser, Spotlight, Scope, Beacon - SN26ZV

    Sometimes you need to extend a PTZ past an obstruction, which is where you would use a Parapet Mount.

    Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

    Dimensions(L × W × H): 34.6” x 32.7”

    Weight: 9.26lb

    Material: Aluminum alloy


  4. Ceiling Pendant Base Mount for Lookout, Laser, Spotlight, Scope, Beacon - PAB26ZV

    Indoor ceiling/hanging based installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, The Beacon

    Allows you to mount our PTZ cameras from the ceiling via our 500mm (19.685 inches) pendant extension pole: 500mm Pendant Extension for Lookout, Laser, Spotlight, Scope, Beacon - PM26ZV-500

    Dimensions: Φ4.6” x 1.2”

    Weight: 0.66lb

    Material: Aluminum alloy

    Requires a Pendant Pole.


  5. 500mm Pendant Extension for The Lookout, Laser, Spotlight, Watchkeeper, Scope, Beacon - PM26ZV-500

    Indoor or outdoor, PTZ dome pendant installation

    Requires a Ceiling Pendant Base Mount.


  6. Ceiling Mount with 200mm Pendant for The Lookout, Laser, Spotlight, Watchkeeper, Scope, Beacon - PM26ZV-200

    This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.


  7. Corner Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - CMB26ZV

    Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

    To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

    To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

    To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

    To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.


  8. Pole Mount Bracket for Lookout, Laser, Watchkeeper, Spotlight, Watchkeeper, Scope, Beacon - PMB26ZV

    Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.


  9. Electrical Box Mount for Lookout, Laser, Watchkeeper, Spotlight, Scope, Beacon - EBM26ZV

    Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

    Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.