Lockey Slow Close Hydraulic Pool, Gate, & Door Closer TB100

The The Turtle Back Gate Closer is perfect for applications where a simple to fit, fully featured gate closer is required. This is used on most any type of gate/door with self closing requirements. Meets most requirements for pool gate, tool crib gates, access gates for self closing access control or secured access applications. The Lockey® Turtle Back fits most flush gate and frame arrangements where the gate weight is up to 150 lbs and width is no more than 54 inches. Travel/latching speeds are fully adjustable, ensuring gate will close and latches in a controlled manner. The TB100 is particularly suited to pool gates, garden gates, picket gates, barrier gates, pool gates and lightweight (non-fire rated) doors. No special skills are required to install this gate closer.

FEATURES

• Closes large or small gates up to 150 lbs, easily, gently, smoothly
• Will not slam your gate
• Complies with most pool gate legislation restrictions (check your local ordinance)
• Adjusting screw regulates closing speed
• Installs on side, top, middle or bottom of right or left hand gate
• Mounts on opening side of door
• Turtle Back closer has a maximum opening angle of 90 degrees. The manufacturer recommends the use of a stop at 90 degrees to prevent damage to the Turtle Back closer.
• Hydraulic action gives ample closing force at the latching point
• Overall dimensions 7-1/2" high, 13" wide, 2-1/2" deep
• Mounting bracket measures 3-1/4" by 1-3/4"
• Steel base material
• Screws are included

Order #: TB100

TECHNICAL OVERVIEW

• Maximum gate weight: 150 lbs.
• Maximum gate width: 54 inches
• Maximum opening angle: 90°
• Type of gate material: Vinyl, Wood, Metal
• Gate closing / latch speed: Adjustable
• Material, Color & Finish:  Steel, Black, Powder Coated
• Opening Pressure: Variable due to gate size
• Dimensions:  2 1/2" D x 7 1/2" H x 13"W
  
  ^Based on non-solid core gates with no wind